Commercial High Temperature Geothermal Water Source Heat Pump 145~210KW
- High-temperature industrial hot water
- Outlet water 90°C temp.
- Modbus protocol is built inside to be controlled by any other external modbus controller. Support central control.
- Underground water, lake water even sea water heat source.
- European standard inverter heat pump
We got the Certificates: TUV ISO9001, ISO45001(Health&Safety), ISO14001 (Environment), TUV EN14825( A+++), TUV CE , TUV CB, 38 patents of product technique, 66 Awards Certificates from Government
Working principle
The energy of the ground source heat pump system comes from the underground energy. It is considered to be currently the most environmentally friendly and most efficient heating and cooling system
- Most energy saving heat pump to utilize the Geothermal, underground water, lake water even sea water heat source.
- Work well in any super cold weather. No capacity loss in even minus -45°C air temp.
- Elegant and Compact size
Wifi & Modbus
Additional 2nd Switch function interface enable to control the heat pump through any other thermostat or switch for convenient control.
Weekly on/off timers (different for each day) help to choose the lowest electricity price working time to save bill.
Wifi cloud remote control function to check heat pump status and control your heat pump on mobile phone.
Modbus protocol and RS485 port for your new controller and PC control
Routine Legionella function (Killing bacteria) .
Kolant Geothermal water source heatpump Benefits
High energy efficient
*High energy efficient:
As the soil temperature is relatively stable, ground source heat pump systems heat transfer efficiency is very high.The power consumption is 40~60% less than central air conditioner and gas boiler.
* Environmentally friendly and clean.
Ground source heat pump system, no boiler, no combustion products. Very clean and low-carbon.
* Comfortable and low noise.
It is a water system, the temperature is steable and comfortable. Super low noise as it works without big fan motor blowing.
* Multifunction.
Heating, cooling and hot water in one solution, heat recovery function is also available. One unit can satisty most of the demands.
Used widely
It can be widely used with all type of water sources. Lake, underground water,sea, and even wasted water
Close loop
The energy of the ground source heat pump system comes from the underground energy. It is considered to be currently the most environmentally friendly and most efficient heating and cooling system
Kolant Geothermal water source heatpump strength
Space saving
No need of cooling tower, boiler room and other outdoor equipments. Indoor fan coil system are also much slim than traditional VRF system.
*Flexiable and reliable operation. It can work for heating or hot water only, or A/C + DHW. Working condition is stable, no capacity decreasion even in the coldest winter.
Simple control
*Long lasting life time. working condition is very stable and mild, the lifetime of water source heat pump is much longer than A/C and boiler.
*Simple control and low maintance cost. The unit is automaticlly controled by the program，easy to operate. Working condition steable no over high or over low pressure problem.
Applications
It can produce hot water at high temperatures and has a wide range of applications, such as in high-temperature heating, high-temperature drying, high-temperature industrial manufacturing processes, and scenarios of waste heat or exhaust heat recovery, etc.
Technical Data
| Model | SYRB-1500EH/SN3 | SYRB-2100EH/SN3 | |
| Heat Pump Operation 1 (Hot Water) | Rated Heating Capacity (kW) | 145 | 210 |
| Rated Heating Input Power (kW) | 40 | 52 | |
| COP (Coefficient of Performance) | 3.63 | 4 | |
| Heat Pump Operation 2 (Hot Water) | Rated Heating Capacity (kW) | 115 | 170 |
| Rated Heating Input Power (kW) | 36 | 50 | |
| COP (Coefficient of Performance) | 3.19 | 3.4 | |
| Heat Pump Operation 3 (Hot Water) | Rated Heating Capacity (kW) | 163 | 220 |
| Rated Heating Input Power (kW) | 35 | 45 | |
| COP (Coefficient of Performance) | 4.65 | 4.89 | |
| Heat Pump Operation 4 (Hot Water) | Rated Heating Capacity (kW) | 123 | 180 |
| Rated Heating Input Power (kW) | 32 | 43 | |
| COP (Coefficient of Performance) | 3.84 | 4.19 | |
| Heat Pump Operation 5 (Hot Water) | Rated Heating Capacity (kW) | 135 | — |
| Rated Heating Input Power (kW) | 43 | — | |
| COP (Coefficient of Performance) | 3.14 | — | |
| Refrigerant | Type | R515B | R134a |
| System Number | 2 | 2 | |
| Control Method | Microcomputer | Microcomputer | |
| Compressor | Model | Screw Type | Screw Type |
| Quantity (Units x HP) | 2 (2X25HP) | 2 (2X25HP) | |
| Evaporator | Form | Plate Type | Plate Type |
| Water Flow (m³/h) | 20 | 30 | |
| Pressure Drop (kPa) | 50 | 60 | |
| Water Inlet Diameter | DN65 | DN65 | |
| Connection Method | External Thread | External Thread | |
| Condenser | Form | High Efficiency Tube | High Efficiency Tube |
| Water Flow (m³/h) | 25 | 36 | |
| Pressure Drop (kPa) | 50 | 60 | |
| Water Inlet Diameter | DN80 | DN80 | |
| Connection Method | Flange | Flange | |
| Product Dimensions (L x W x H mm) | 1600x1200x1200 | 1600x1200x1200 | |
| Safety Protection | High/Low Pressure/Anti-freeze/Overheat Protection | ||
| Machine Noise (dB(A)) | 65 | 66 | |
Installation cases
