- Mitsubishi Technology achtergrond, Warmtepomptechnologie sinds 1988! Warmtepompen Europese stijl, Neem nu contact met ons op voor betrouwbare warmtepompen
- info@china-heatpump.com
Kolant tabak warmtepompdroger
Kolant Warmtepomp huis Droger en verwarming bouwen om kosten te besparen na de bouw
08/07/2024
Kolant digitale warmtepomp droger met vrije koeling kamer
08/07/2024
Green Energy Tobacco Drying Energy Saving Solution
Tobacco drying requirement
Generally, a three-stage process is adopted, and different temperatures are needed in each stage. change to yellow, fix color and tendon drying;The temperature of drying room should be controlled to avoid the appearance of smoke and miscellaneous smoke, which will affect the grade of finished products; The proportion of wet smoke to dry smoke is about 10: 1, and the amount of moisture discharged is very large; The content of nicotine and aromatic substances in tobacco leaves also affects the drying quality.
Tobacco Dehumidifying Dryer Process Chart.
Tobacco Dryer controller
Kolant Multifunctional Heat Pump Dryer Energy Consumption
The energy-saving effect is remarkable, saving 30%~60% energy compared with other drying methods Dehydration of 100Kg under the same working conditions: drying temperature T1 = 659, at this time the vaporization of water requires Total heat Q= 56000KCAL, the energy consumption of various drying methods is as follows:
Advantages of Kolant Heat Pump Drying machine
Energy Saving
The energy consumption of heat pump drying devices can be reduced by more than 40% compared with ordinary drying devices.
Intelligent
Fully digital sensor technology control makes the drying process more scientific and reasonable, and can Improve quality and increase accessory value.
Safe
It is convenient to dry inflammable and explosive products and easily oxidized and deteriorated products with the closed circulation of inert drying medium.
Environmental protection
Waste gas, waste water, waste residue and pollution are not discharged to the environment during the working process, and aroma components and solvents can be recovered.
Easy
Easy for installation and maintenance, Simple installation, short construction period, convenient maintenance and long service life.
Low ambient temperature
It is easy to realize low temperature drying at 40~90℃ under normal pressure, and high drying quality can be obtained. Working ambient temp is wide range.
Kolant warmtepomp installatie project referentie
Gerelateerde berichten
02/09/2026
01/22/2026
