Kolant tobacco heat pump dryer

Kolant Heat Pump house Building Dryer and heater to save cost after construction

08/07/2024

Kolant digital heat pump dryer with free room cooling

08/07/2024

Categorias

Etiquetas

Green Energy Tobacco Drying Energy Saving Solution

Tobacco drying requirement

Generally, a three-stage process is adopted, and different temperatures are needed in each stage. change to yellow, fix color and tendon drying;
The temperature of drying room should be controlled to avoid the appearance of smoke and miscellaneous smoke, which will affect the grade of finished products; The proportion of wet smoke to dry smoke is about 10: 1, and the amount of moisture discharged is very large; The content of nicotine and aromatic substances in tobacco leaves also affects the drying quality.

Tobacco Dehumidifying Dryer Process Chart.

Tobacco Dryer controller

Kolant Multifunctional Heat Pump Dryer Energy Consumption

The energy-saving effect is remarkable, saving 30%~60% energy compared with other drying methods Dehydration of 100Kg under the same working conditions: drying temperature T1 = 659, at this time the vaporization of water requires Total heat Q= 56000KCAL, the energy consumption of various drying methods is as follows:

Kolant solar direct drive Multifunctional heat pump

Advantages of Kolant Heat Pump Drying machine

Energy Saving

The energy consumption of heat pump drying devices can be reduced by more than 40% compared with ordinary drying devices.

Intelligent

Fully digital sensor technology control makes the drying process more scientific and reasonable, and can Improve quality and increase accessory value.

Safe

It is convenient to dry inflammable and explosive products and easily oxidized and deteriorated products with the closed circulation of inert drying medium.

Environmental protection

Waste gas, waste water, waste residue and pollution are not discharged to the environment during the working process, and aroma components and solvents can be recovered.

Easy

Easy for installation and maintenance, Simple installation, short construction period, convenient maintenance and long service life.

Low ambient temperature

It is easy to realize low temperature drying at 40~90℃ under normal pressure, and high drying quality can be obtained. Working ambient temp is wide range.