- EVI compressor
- R290/R32 refrigerant
- Work under -30ºC
- Inversor
- Replace boiler
- save and safe
Newest EVI compressor technology for super cold area and high outlet water temp.
Heating , Cooling and domestic hot water functions, with R32 refrigerant and most advance European technology to work well in Minus -25ºC.
Optional inverter EVI compressor is workable even at -35C.
Much more Higer efficiency than normal air source heat pump.
Kolant EVI inverter air to water heat pump performance for more than 2 hours with little recession.
Características principales:
1. EVI compressor special designed to get high outlet water temperature at super low air temp. work stably at -25C ambient temperature with only little capacity recession.2. Inverter EVI compressor model is available suitable to work at -30C.
3. Using EEV(electronic expansion valve) to achieving accurate, stable and high efficiency throttling.
4. Outdoor Fin-coil heat exchanger is hydrophilic coated, golden fin is optional for more anti-rust for seaside area.
5. Compressor preheated to protect compressor in cold winter.
6. Automatic defrosting function with bottom hot piping tech enable our EVI heat pump to work without capacity concession even not necessary to defrost in long hours as shown performance curve.
7. Función de compensación meteorológica, Curva de temperatura del agua ajustada automáticamente en función de las diferentes temperaturas ambientales.
| Rango de temperatura del aire exterior | |||
| Refrigeración | Calefacción | Agua caliente sanitaria | |
| Máximo |
52 |
30 | 46 |
| Mínimo | 15 | -35 | -35 |
| Rango de temperatura del agua de salida | |||
| Refrigeración | Calefacción | Agua caliente sanitaria | |
| Máximo | 18 | 60 | 60 |
| Mínimo | 5 | 30 | 30 |
Qualified component/Brand parts
1 Quality for reliability and save maintenance cost:
2 Our parts are always choosend with the top brand in the world
3 Heat exchanger: SU319 intercambiador de calor de placas de material alimentario.
4 Heat expansion valve: Emerson marca
5 Four way valve: Saginomiya marca de Japón
Estas piezas permiten que nuestra bomba de calor sea un producto sin problemas.
Aplicaciones
1 Free functions combination: heating, cooling with or without domestic hot water.
2 Flexiable installation. Compatible with :
-Floor heating and cooling.
-Fan-coils and low temp radiators.
-Solar water heating.
Technical Parameters
| Modelos | Temperatura del aire/temperatura del agua de salida | RJ85/N8-BPEEVI | COP | RJ-110/N8-BPE | COP | RJ-150/SN8-BPEEVI | COP | RJ-180/SN8-BPEEVI | COP | RJ-230/SN8-BPEEVI | COP |
| Potencia calorífica/Potencia absorbida (kW) |
a A20/W35°C | 10.6/1.89 | 5.61 | 14.42/2.88 | 5.01 | 21.1/3.89 | 5.42 | 22.8/4.4 | 5.18 | 29.5/6.01 | 4.91 |
| a A7/W35°C | 8.59/1.87 | 4.59 | 10.6/2.55 | 4.16 | 14.7/3.31 | 4.44 | 18.8/4.4 | 4.27 | 23.1/5.34 | 4.33 | |
| a A7/W45°C | 7.91/2.23 | 3.55 | 9.97/3.14 | 3.18 | 13.5/4.1 | 3.29 | 17.8/5.24 | 3.4 | 22.6/6.11 | 3.7 | |
| a A2/W35°C | 7.65/1.81 | 4.23 | 9.54/2.49 | 3.83 | 13.08/3.21 | 4.07 | 16.92/4.31 | 3.93 | 20.29/5.38 | 3.77 | |
| a A2/W45°C | 7.04/2.15 | 3.27 | 8.97/3.06 | 2.93 | 12.02/3.97 | 3.03 | 16/5.12 | 3.13 | 18.7/6.4 | 2.92 | |
| a A-12/W41°C | 5.9/2.45 | 2.41 | 6.3/2.7 | 2.33 | 10.2/4.35 | 2.34 | 11.6/5.04 | 2.3 | 14.7/5.88 | 2.5 | |
| a A-20/W41°C | 5.4/2.56 | 2.11 | 5.61/2.72 | 2.06 | 8.9/4.23 | 2.1 | 10.5/4.97 | 2.11 | 13.7/5.78 | 2.37 | |
| Capacidad de refrigeración/Potencia absorbida (kW) |
a A35/ W18ºC | 9.2/2.7 | 3.41 | 11/3.3 | 3.33 | 13.9/4.2 | 3.31 | 15.6/4.8 | 3.25 | 20.1/6.2 | 3.24 |
| a A35/W7ºC | 7.2/2.73 | 2.64 | 8.6/3.4 | 2.53 | 9.8/3.77 | 2.6 | 10.5/4.2 | 2.5 | 13.5/5.09 | 2.65 | |
| Max.current (A) | 18 | 19 | 28 | 14.3 | 18.1 | ||||||
| Suministro eléctrico | 230V/50~60HZ | 400V/50~60HZ | 400V/50~60HZ | ||||||||
| Max.Outlet water temperature ( oC) | 60 | ||||||||||
| Running temperature range (oC) | -30 ~ 43 | ||||||||||
| Circuito refrigerante |
Refrigerante | R32 | |||||||||
| Compresor(es) DC Inverter |
MITSUBISHI | MITSUBISHI | MITSUBISHI | MITSUBISHI | MITSUBISHI | ||||||
| Intercambio de calor |
Aleta de cobre y aluminio hidrófilo | ||||||||||
| Caudal de aire (m3/h) | 2400 | 5800 | 6000 | 7000 | |||||||
| Circuito de agua |
Intercambiador de calor | Intercambiador de calor de tubo en carcasa de alto rendimiento | |||||||||
| Tubería de entrada/salida | DN25(G1″) | DN25(G1″) | DN25(G1″) | DN25(G1″) | DN25(G1″) | ||||||
| Caudal de agua (m3/h) | ≥1.5 | ≥1.8 | ≥2.5 | ≥3 | ≥3.9 | ||||||
| presión permitida | ≤0,8MPa | ||||||||||
| Dimensiones de la unidad AnxAlxPr (mm) | 960*820*380 | 960*820*380 | 960*1270*380 | 960*1270*380 | 1030*1340*390 | ||||||
| Dimensiones del paquete AnxAlxPr (mm) | 1040*940*502 | 1040*940*502 | 1040*1390*502 | 1040*1390*502 | 1115*1510*510 | ||||||
| Peso neto (Kg) | 68 | 68 | 108 | 108 | 128 | ||||||
| Peso bruto (Kg) | 85 | 85 | 125 | 125 | 145 | ||||||
| Nivel de ruido (dB(A)) | 56 | 56 | 59 | 59 | 60 | ||||||
| Loading quantity for 20’/40′ | 44/88 | 44/88 | 22/44 | 22/44 | 22/44 | ||||||
