KWTA WATER SOURCE Heat Pump
KWTA‑110 Inverter Water Source Heat Pump
High Efficiency Cooling & Heating for Commercial Applications
11.0 kW Cooling
13.5 kW Heating
EER: 4.2 | COP: 4.5
Refrigerant: R32
IP Rating: IPX4
Основные особенности
Inverter Rotary Compressor
High COP & EER
Compact Cabinet Design
R32 Refrigerant
IPX4 Water Protection
Multiple Safety Protections
Auto Fault Diagnosis
Smart Wi‑Fi Control
Product Highlights & Internal Structure
Internal Structure
- Rotary Inverter Compressor
- High‑efficiency Tank Heat Exchanger
- Finned‑tube Condenser
- Electrical Control Box & Wi‑Fi Communication Module
- Copper Piping & Hydraulic Components
Core Advantages
- Inverter Technology: Adjusts capacity according to heat load, delivering high efficiency at partial load.
- High COP / EER: COP up to 4.5 and EER up to 4.2 for lower energy consumption.
- R32 Refrigerant: Low GWP, environmentally friendly and excellent heat transfer performance.
- Compact Vertical Cabinet: Small footprint, suitable for commercial and residential mechanical rooms.
- Full Safety Protection: High/low pressure, water flow, freeze, overheat, overload and fault diagnosis.
Smart Wi‑Fi Mobile Control
- Remote ON/OFF operation
- Set cooling and heating target temperature
- Real‑time running‑status monitoring
- Fault alarm push notification
- Timer schedule setting
- Historical operation‑data record for maintenance
System Working Principle & Water Tower Connection
Operation Description
The KWTA‑110 forms a closed circulating water loop with external cooling tower, water pump, filter and expansion tank.
- Cooling Mode: The unit absorbs heat from indoor air and releases heat to the circulating water. Heat is then dissipated to ambient air through the cooling tower.
- Heating Mode: The unit extracts heat from the circulating water loop and transfers it to indoor air for space heating.
System Installation Requirements
- Install a 40‑mesh or finer water filter at unit water‑inlet pipe.
- Keep actual water flow within ±10 % of nominal value 2.3 m³/h.
- Install vent valve at highest piping point, drain plug at lowest point.
System Notes
- Water quality needs regular inspection to prevent scaling inside heat exchanger.
- Insulate all water pipes to avoid condensation and heat loss.
- Install bypass piping for maintenance without shutdown of the whole system.
- Check pump pressure and water flow rate periodically during routine maintenance.
Technical Specifications
| Пункт | Технические характеристики |
|---|---|
| Модель | KWTA‑110HCH/N8‑BP |
| Rated Cooling Capacity | 11.0 kW |
| Rated Heating Capacity | 13.5 kW |
| Cooling Input Power | 2.62 kW |
| Heating Input Power | 3.00 kW |
| Cooling Input Current | 13.9 A |
| Heating Input Current | 15.3 A |
| EER / COP | 4.2 W/W / 4.5 W/W |
| Источник питания | 230V 60Hz |
| Max Input Power / Current | 4.4 kW / 21.4 A |
| Refrigerant / Charge | R32 / 1.40 kg |
| CO₂ Equivalent | 0.945 t |
| Nominal Water Flow | 2.3 m³/h |
| Water Connection | Female 1" |
| Dimension D×W×H | 666 × 551 × 1148 mm |
| Вес нетто | 125 kg |
| Уровень шума | 50 dB(A) |
| IP Rating | IPX4 |
| Max Water Outlet Temp | 50 °C |
| Тип компрессора | Rotary Inverter |
Приложения
Data Center
Hotel
Villa
Residence
Hospital
Office Building
Shopping Mall
Entertainment Center
Retail Facility
Protection List
- High / Low Pressure Protection
- Water‑shortage & Freeze Protection
- Overheat & Overload Protection
- Reverse‑phase & Phase‑loss Protection
- Excessive water‑flow temperature‑difference protection
- Sensor fault self‑diagnosis & automatic anti‑freeze control
Note: Performance data is based on rated test conditions. Actual capacity may suffer approx. 5 % loss caused by piping, valves and fouling. Manufacturer reserves the right for technical improvement without prior notice.
