Kolant heat pump house building dryer and heater is capable of drying house building, Plants, garbage, seafood, timber, lumber with control curve and low cost.
Temperature and humidity curves can be set at will to adapt to different species drying.
Drying temperature and humidity control is more accurate,
airflow direction design is more reasonable,
heat transfer is even and drying is more comprehensive.
Dehumidifying Dryer Process Chart.
Kolant heat pump building dryer and heater adopts a unique multi-loop system design, with uniform temperature control and 20%~30% increase in dehumidification, which effectively shortens the drying time, solves the problems of uneven drying and substandard dehumidification, and improves the drying quality.
Hot Wind Dryer Process Chart.
Kolant Multifunctional Heat Pump Dryer Energy Consumption
The energy-saving effect is remarkable, saving 30%~60% energy compared with other drying methods Dehydration of 100Kg under the same working conditions: drying temperature T1 = 659, at this time the vaporization of water requires Total heat Q= 56000KCAL, the energy consumption of various drying methods is as follows:
Advantages of Kolant Heat Pump house building dryer
Energy Saving
The energy consumption of heat pump drying devices can be reduced by more than 40% compared with ordinary drying devices.
Intelligent
Fully digital sensor technology control makes the drying process more scientific and reasonable, and can Improve quality and increase accessory value.
Safe
It is convenient to dry inflammable and explosive products and easily oxidized and deteriorated products with the closed circulation of inert drying medium.
Environmental protection
waste gas, waste water, waste residue and pollution are not discharged to the environment during the working process, and aroma components and solvents can be recovered.
Easy
Easy for installation and maintenance, Simple installation, short construction period, convenient maintenance and long service life.
Low ambient temperature
It is easy to realize low temperature drying at 40~90℃ under normal pressure, and high drying quality can be obtained. Working ambient temp is wide range.
Prosjektreferanse for installasjon av Kolant varmepumpe
Hope to receive more about this series news!