Open Loop Water Source Heat Pump-Water to Water Heat Pump 7-60KW

Titanium Heat exchanger,special water source heat pump for open loop water,even working well with sea water. Extrimely easy installation for houses beside river,lake,sea!

Heating Cooling Ground source/ Water source HeatPump  single unit with slim size and good price (7-60KW)

Water source heat pump Heat recovery is only optional for clean water source.

5 Times Energy Saving as Normal Gas or Petrol Heater.

Suitable for Frigid zone area.  No capacity loss in even -30C air temp.

Quite unit, free of neighbour complain.

Main Characters:

1.   Extrimly energy saving, super cost saving with R410a gas inside.

2.   Special open loop heat exchanger suitable even for sea water, the installation is easy and flexible.

3.   Can be connected with solar water heater system.

4.   All water access parts are stainless steel and copper to keep safe, healthy and non-pollution

 

Quality for reliability and save maintenance cost:

  Our parts are always choosend with the top brand in the world

Heat exchanger: Stainless steel SU316 plate heat exchanger.

The compressor: Daikin brand Scroll type

Heat expansion valve: Emerson brand

Water pump: Wilo brand from Germany (optional parts)

Four way valve: Saginomiya brand of Japan

The above parts enable our heat pump to be trouble free products.

Warer source heat pump (ground source heat pump) working theory diagram.

Flexible installation of typical water source heat pump application:

Geothermal Open Loop Well Water Source Heat Pump

Geothermal Heat Pump for Lake, Pond and River

Geothermal Heat Pump Horizontal Ground loop

Geothermal heat pump vertical ground loop

Water source heat pump parameter

Model No			OH-8	OH-11	OH-15	OH-17	OH-19S	OH-20	OH-25	OH-30	OH-60
Heating	Nomical Capacity(W10ºC/W35ºC)	KW	7.8	11	14.6	16.6	18.81	20.58	25.55	30	60
	Power Input (W10ºC/W35ºC)	KW	1.7	2.4	3.36	3.37	3.75	4.2	5.2	6.1	12.3
	COP(W10ºC/W35ºC)	KW/KW	4.59	4.58	4.35	4.93	5.02	4.9	4.91	4.92	4.88
	Nomical Capacity(B0ºC/W35ºC)	KW	6.8	8.5	12.2	13.4	15.1	17.30	21.00	25.4	50.8
	Power Input (B0ºC/W35ºC)	KW	1.7	2.15	3.12	3.25	3.5	3.9	4.80	5.8	11.65
	COP(B0ºC/W35ºC)	KW/KW	4	3.95	3.91	4.12	4.31	4.44	4.38	4.38	4.36
Cooling	Nomical Capacity	KW	8.2	11.2	15.09	16.9	18.88	20.5	25.3	30.5	61
	Power Input	KW	1.8	2.52	3.67	3.67	4.32	4.3	5.20	6.2	12.4
	EER	KW/KW	4.56	4.44	4.11	4.6	4.37	4.77	4.87	4.92	4.92
Power Supply			220-230V/50HZ				380-415V/50hz
Max Output water temp		ºC	60
Mini water flow(L/H)(Water Source side)		Litre/Hour	1800	2800	4000	5000	5450	5800	7000	8500	17000
Mini water flow(L/H)(Heatpump side)		Litre/Hour	1000	1750	2400	3000	3280	3500	4300	5200	10400
Water source side Diameter(mm)		mm	DN25					DN32
Heatpump side diameter(mm)		mm	DN25						DN32
Packing size(mm)	L*H*W	mm	650x1080 x490	770x1130x580		770x1230x580					700x1080 *920
Unit size(mm)	L*H*W	mm	600x960 x430	720x1010x520		720x1110x520					650x960 x800
Protection class			IPx4
Anti Shock class			Class 1
Refrigerant			R410a
Noise Level		dB	29	30	31	32	32	33	34	36	38
Regulation component			Emersion expansion valve
Condenser HX			Plate heat exchanger
Evaporator HX			Plate heat exchanger
Net weight		kg	83	118	125	135	125	181	202	225	450
Gross weight		kg	88	123	130	140	130	186	217	230	460

Two Year Warranty!

We provide 1% free spareparts with containered order and 2 year warranty of main parts for factory fault since shipment arrival.

We will send the spare parts by courrier method after confirm it is due to factory fault.

We don't cover the cost for failure from shipment, wrong installation and incorrect usage. Of course we can provide parts by customer's cost after warranty period.

Customer Service

We can provide free heat pump installation consultation.

We can provide after sales service, technical assistant.

We can help to purchase other parts related to heat pumps or recommand reliable suppliers directly.

Shipping

For heat pump samples delivery, after packing with export class thick 5 layers paper box, we will pack heat pumps with poly wood case to avoid any damage as shown attached.

There are two ways to delivery the samples.

For sea freight, we will keep the refrigerant inside of the heat pump.

For air freight cargo, due to the air line regulation, we need to drain out the refrigerant. So you need to charge the refrigerant if you find the heat pump cannot start.

For all products above 50kg, we will fix it on a good structured wood or polywood pallet as shown below.

Good heat pump packing and be careful with every details. 

 Polywood case packing and Pallet support for safety and no pollution.

For Container delivery, we use only export thick 5 layer paper box. After carefully loading, we will take pictures before close the container door to assure everything is ok.

If by sea, normally we export at EXW, FOB or CFR terms, we only delivery goods to the destination sea port. The customers need to cover cost for their import duty and cost. Of course the customers can use our forwarder agent to help you to clear the customs.

We can provide all necessary document such as Form A, certificate of origin, Bill of lading, Invoice and packing list.

Normally it will take about 30 days by sea and one week by air.

Geothermal Heatpump-Water source Ground source Heat Pump mono type 7-60KW

Heating Cooling Ground source/ Water source HeatPump  single unit with slim size (7-60KW)

Water source heat pump Heat recovery is optional.

5 Times Energy Saving as Normal Gas or Petrol Heater.

Suitable for Frigid zone area.  No capacity loss in even -30C air temp.

Quite unit, free of neighbour complain.

Main Characters:

5.   Extrimly energy saving, super cost saving with R410a gas inside.

6.   Installation is easy and flexible.

8.   Can be connected with solar water heater system.

9.   All water access parts are stainless steel and copper to keep safe, healthy and non-pollution

 

Quality for reliability and save maintenance cost:

    Our parts are always choosend with the top brand in the world

Heat exchanger: Stainless steel SU316 plate heat exchanger.

The compressor: Daikin brand Scroll type

Heat expansion valve: Emerson brand

Water pump: Wilo brand from Germany (optional parts)

Four way valve: Saginomiya brand of Japan

The above parts enable our heat pump to be trouble free products.

Warer source heat pump (ground source heat pump) working theory diagram.

Flexible installation of typical water source heat pump application:

For Open Loop Water Source Heat Pump, please check our special open loop water source heat pump models at http://www.china-heatpump.com/open-loop-water-source-heat-pump-water-to-water-heat-pump-7-60kw.html

Geothermal Heat Pump for Lake, Pond and River

Geothermal Heat Pump Horizontal Ground loop

Geothermal heat pump vertical ground loop

Water source heat pump parameter

Model No			GH-7	GH-9	GH-11	GH-15	GH-17	GH-20	GH-25	GH-30	GH-60
Heating	Nomical Capacity(W10ºC/W35ºC)	KW	7	9	11	14.55	16.6	20.58	25.55	30	60
	Power Input (W10ºC/W35ºC)	KW	1.5	1.9	2.4	3.36	3.37	4.2	5.2	6.1	12.3
	COP(W10ºC/W35ºC)	KW/KW	4.67	4.74	4.58	4.33	4.93	4.9	4.91	4.92	4.88
	Nomical Capacity(B0ºC/W35ºC)	KW	5.8	7.8	8.5	12.2	13.4	17.30	21.00	25.4	50.8
	Power Input (B0ºC/W35ºC)	KW	1.4	2	2.15	3.12	3.25	3.9	4.80	5.8	11.65
	COP(B0ºC/W35ºC)	KW/KW	4.14	3.9	3.95	3.91	4.12	4.44	4.38	4.38	4.36
Cooling	Nomical Capacity	KW	7.3	9.2	11.2	15.09	16.9	20.5	25.3	30.5	61
	Power Input	KW	1.7	2.1	2.52	3.67	3.67	4.3	5.20	6.2	12.4
	EER	KW/KW	4.29	4.38	4.44	4.11	4.6	4.77	4.87	4.92	4.92
COP for heat recovery model		KW/KW	7.17	7.3	7.22	6.75	7.62	7.74	7.82	7.87	8.54
Power Supply			220-230V/50HZ					380-415V/50hz
Max Output water temp		ºC	60
Mini water flow(L/H)(Water Source side)		Litre/Hour	1000	1500	1750	2400	3000	3500	4300	5200	10400
Mini water flow(L/H)(Heatpump side)		Litre/Hour	1000	1500	1750	2400	3000	3500	4300	5200	10400
Water source side Diameter(mm)		mm	DN25					DN32
Heatpump side diameter(mm)		mm	DN25					DN32
Packing size(mm)	L*H*W	mm	700x1080*460								700x1080*920
Unit size(mm)	L*H*W	mm	650x960x400								650x960x800
Protection class			IPx4
Anti Shock class			Class 1
Refrigerant			R410a
Noise Level		dB	29	30	30	31	32	33	34	36	38
Regulation component			Emersion expansion valve
Condenser HX			Plate heat exchanger
Evaporator HX			Plate heat exchanger
Net weight		kg	73	78	108	115	125	171	192	215	440
Gross weight		kg	78	83	113	120	130	176	197	220	450

Two Years Warranty !

We provide 1% free spareparts with containered order and 2 year warranty of main parts for factory fault since shipment arrival.

We will send the spare parts by courrier method after confirm it is due to factory fault.

We don't cover the cost for failure from shipment, wrong installation and incorrect usage. Of course we can provide parts by customer's cost after warranty period.

Customer Service

We can provide free heat pump installation consultation.

We can provide after sales service, technical assistant.

We can help to purchase other parts related to heat pumps or recommand reliable suppliers directly.

Shipping

For heat pump samples delivery, after packing with export class thick 5 layers paper box, we will pack heat pumps with poly wood case to avoid any damage as shown attached.

There are two ways to delivery the samples.

For sea freight, we will keep the refrigerant inside of the heat pump.

For air freight cargo, due to the air line regulation, we need to drain out the refrigerant. So you need to charge the refrigerant if you find the heat pump cannot start.

For all products above 50kg, we will fix it on a good structured wood or polywood pallet as shown below.

We use good heat pump packing and are careful with every details. 

Polywood case packing and Pallet support for safety and no pollution.

For Container delivery, we use only export thick 5 layer paper box. After carefully loading, we will take pictures before close the container door to assure everything is ok.

If by sea, normally we export at EXW, FOB or CFR terms, we only delivery goods to the destination sea port. The customers need to cover cost for their import duty and cost. Of course the customers can use our forwarder agent to help you to clear the customs.

We can provide all necessary document such as Form A, certificate of origin, Bill of lading, Invoice and packing list.

Normally it will take about 30 days by sea and one week by air.

Combined heating cooling and hot water heat pump 2kw-30kw

Heating Cooling Heat Pump available for 2KW,3.5KW,4.5KW,7KW,9KW,11KW,15KW,17KW,20KW,22KW,30,40KW

1. Heat pump with combined Heating, cooling and domestic hot water function in one solution for all family requirement in whole year.

2. Built inside fuzzy logic solar combination operation utilize solar for both room heating and domestic hot water, which enable more energy saving than other heat pump.

3. Intelligent automatic operation mode of DHW and room heating for more energy saving during different ambient temp;

4. Intelligent auto defrost, antifreeze protection for low ambient temp operation to minus -15.

5. Real weekly timer-Different setting for every day of the week to fit your life habit the most and save energy. Imaging you will enjoy your weekend in tourism with your sweet family, then the heat pump doesn't need to start at weekend.

6. More energy saving and much more comfortable than normal air conditioner;

7.All error code can be checked through controller display which enable you to solve the problem as soon as possible.

Two Years Warranty !

We provide 1% free spareparts with containered order and 2 year warranty of main parts for factory fault since shipment arrival.

We will send the spare parts by courrier method after confirm it is due to factory fault.

We don't cover the cost for failure from shipment, wrong installation and incorrect usage. Of course we can provide parts by customer's cost after warranty period.

Customer Service

We can provide free heat pump installation consultation.

We can provide after sales service, technical assistant.

We can help to purchase other parts related to heat pumps or recommand reliable suppliers directly.

Shipping

For heat pump samples delivery, after packing with export class thick 5 layers paper box, we will pack heat pumps with poly wood case to avoid any damage as shown attached.

There are two ways to delivery the samples.

For sea freight, we will keep the refrigerant inside of the heat pump.

For air freight cargo, due to the air line regulation, we need to drain out the refrigerant. So you need to charge the refrigerant if you find the heat pump cannot start.

For all products above 50kg, we will fix it on a good structured wood or polywood pallet as shown below.

For Container delivery, we use only export thick 5 layer paper box. After carefully loading, we will take pictures before close the container door to assure everything is ok.

If by sea, normally we export at EXW, FOB or CFR terms, we only delivery goods to the destination sea port. The customers need to cover cost for their import duty and cost. Of course the customers can use our forwarder agent to help you to clear the customs.

We can provide all necessary document such as Form A, certificate of origin, Bill of lading, Invoice and packing list.

Normally it will take about 30 days by sea and one week by air.

Low ambient temp split heat pump-Palm Tritherma Slim heat pump

Minus -20 ºC working heating-Palm Tritherma split heat pump

Heating + Cooling + Domestic hot water in one solution. Similar function as popular split heat pump.

Can be working heating in super cold weather.

Products characters

1. It can provide air heating, air cooling and domestic hot water in one solution, similar function as LG Therma V and Daikin Altherma split heat pump.
2. It can utilize the existing water tank, radiator and other heating system and is idea equipment for home upgrading to energy saving house.
3. Built inside solar connection program enable solar for hot water and air heating together.
4. Excellent auto defrost for keeping heating during -20 centigrade.
even in electric power off accident, it still can keep no freeze for several days.
Special patent outdoor design to prevent the ice building during winter heating.
Built in crankcase heater to protect compressor during winter.
5. One water tank with expansion tank and backup electric heaters, other hydraulic components built inside
6. Timers on/off for you to choose the lowest electricity price period for operation to save your bill the most.
7. Parts are always choosen with the top brand in the world to assure quality, reliability and save maintenance cost.

 

Reliable Quality for saving maintenance cost:
  Our parts are always choosend with the top brand in the world
Heat exchanger: SU316 stainless plate heat exchanger.
The compressor: Daikin, Hitachi,Toshiba,Sanyo brand
Heat expansion valve: Emerson brand
Optional water pump: Wilo brand from Germany
Four way valve: Saginomiya brand of Japan
The above parts enable our heat pump to be trouble free products.

 

Technical Data				MQD-11	MQD-14	MQD-17	MQD-20
Heating	Floor heating	capacity	KW	11.1	14.2	16.8	19.50
		power input	KW	2.45	3.3	4	4.33
		COP		4.53	4.3	4.2	4.50
	Fan coils	capacity	KW	11.58	13.9	15.1	18.8
		power input	KW	3.01	3.56	3.97	5.08
		COP		3.85	3.9	3.8	3.7
cooling		capacity	KW	11.5	14.5	17.3	19.80
		power input	KW	3.2	4.14	5.24	5.11
		EER		3.59	3.5	3.3	3.87
domestic hot water		capacity	KW	10.7	14	16.5	17.80
		power input	KW	2.9	3.9	4.71	5.10
		COP		3.69	3.59	3.5	3.49
Power supply			V/Ph/Hz	230/1/50			380/3/50
A/C water tank volume			L	12
Dimension(H*W*D)(Indoor unit)			MM	730*460*322
Dimension(H*W*D)(Outdoor unit)			MM	860*870*325	960*970*345	1260*970*345	1260*970*345
Weight		Indoor unit	KG	55		56	57
		Outdoor unit	KG	70	98	110	125
Refrigerant				R410A
Noise Level		Indoor unit	DB(A)	35
		Outdoor unit	DB(A)	47	48	42	42
Recommand additional water tank for Domestic Hot Water			L	>150	>150	>150	>200

Two Year Warranty !

We provide 1% free spareparts with containered order and 2 year warranty of main parts for factory fault since shipment arrival.
We will send the spare parts by courrier method after confirm it is due to factory fault.
We don't cover the cost for failure from shipment, wrong installation and incorrect usage. Of course we can provide parts by customer's cost after warranty period.

Customer Service

We can provide free heat pump installation consultation.

We can provide after sales service, technical assistant.
We can help to purchase other parts related to heat pumps or recommand reliable suppliers directly.

Shipping

For heat pump samples delivery, after packing with export class thick 5 layers paper box, we will pack heat pumps with poly wood case to avoid any damage as shown attached.

There are two ways to delivery the samples.
For sea freight, we will keep the refrigerant inside of the heat pump.
For air freight cargo, due to the air line regulation, we need to drain out the refrigerant. So you need to charge the refrigerant if you find the heat pump cannot start.
For all products above 50kg, we will fix it on a good structured wood or polywood pallet as shown below.
 

For Container delivery, we use only export thick 5 layer paper box. After carefully loading, we will take pictures before close the container door to assure everything is ok.

If by sea, normally we export at EXW, FOB or CFR terms, we only delivery goods to the destination sea port. The customers need to cover cost for their import duty and cost. Of course the customers can use our forwarder agent to help you to clear the customs.
We can provide all necessary document such as Form A, certificate of origin, Bill of lading, Invoice and packing list.

Normally it will take about 30 days by sea and one week by air.

Split Sanitary Hot Water Heat pump 2KW-3.5KW-4.5KW-7KW

Palm Split Sanitary Hot Water Heat pump 2KW-3.5KW-4.5KW-7KW

Palm heat pump Split Sanitary Hot Water Heat pump is ideal system to utilize existing water tank of

boiler or electric heater with much more cost saving and more safety.

Striking characters:
1. Only water pipes connection needed.  Super easy installation. Complete DIY system.
2.No fuel tubes and storage, no potential danger from oil leakage, fire, explosion,etc.
3.Max. outlet waterTemperature: 60 °C.
4. Automatic star-up and shut down, automatic defrosting. Can be controlled by timer setting.
5. High Efficiency and energy saving with R410a, 1/4 operation cost of electric heater.
6. More application according to customer requirement.  Buy from Palm, you can also use it for room heating and cooling.

Model No	Test Condition Air temp/Oulet water temp	AH-2AC-410	AH-3.5AC-410	AH-4.5AC-410	AH-7AC-410
Heating Capcity/Input Power (KW/KW)	At A20/55ºC	2.1/0.47	3.5/0.8	4.5/1.02	7.05/1.6
	At  A7/35ºC	1.8/0.46	2.5/0.6	3.8/0.98	5.7/1.5
	At  A2/35ºC	1.4/0.45	1.8/0.58	3.2/0.95	4.89/1.45
Cooling Capcity(KW)	At  A35/18ºC	2/0.54	2.6/0.72	4.1/1.15	6.1/1.76
Power Supply		220V/50HZ
Working Range	ºC	-15 ~ 43
Max Output water temp	ºC	60
Mini water flow(L/H)(Heating and cooling)	M3/h	>=0.3	>=0.35	>=0.6	>=0.8
Recommanded water tank	Litre	>50Litre	>50 Litre	>80 Litre	>100 litre
Water connection joint	mm	DN20(3/4'')
Packing size	mm	360*650*790	360*650*790	360*650*790	430*695*1010
Unit size	mm	254*540*772	254*540*772	254*540*772	290*605*850
Protection class		IPx4
Anti Shock class		Class 1
Refrigerant		R410a
Noise	dB	38	40	42	45
Regulation component		Emersion Expansion valve
Compressor type		Rotary
Heating Cooling heat exchanger		Stainless Steel Plate Heat exchanger
Loading quantity for 20'/40'	pcs	138/276	138/276	138/276	90/180

All in one Sanitary hot water heat pump

All in one Sanitary hot water heat pump

Chengda all in one sanitary hot water heat pump is ideal system to replace current

hot water boiler or electric heater with much more cost saving and more safety.

Striking characters:
1.Super easy installation. Complete DIY system.
2. Special compact design for sanitary hot water of family use suitable for indoor installation.
3.No fuel tubes and storage, no potential danger from oil leakage, fire, explosion,etc.
4.Max. outlet waterTemperature:60 °C.
5. Automatic star-up and shut down, automatic defrosting. Can be controlled by timer setting.
6. High Efficiency and energy saving with R410a, 1/4 operation cost of electric heater.
7. Multiple function: with different installation, the unit can work as heat pump, fresh air blower, dehumidifier, or an energy recovery equipment.

MODEL			SHW-200	SHW-250	SHW-300
Power supply		V/Ph/Hz	220～240V-1Ph-50Hz
Water tank capacity		L	200	250	300
Runnning Ambient temp.		℃	-5～43
Water outlet Temp		℃	25～60
Water heating	Rated Heating Capacity[1]	KW	3.8
	Rated input	KW	0.96
	Rated Current	A	4.4
	Max.input consumption [2]	KW	1.5
	Max. input Current  [2]	A	6.9
Compressor	Compressor Qty.		1
	Compressor		Rotary
	Model		KN122
	Brand		Mitsubishi
	Capacity	μF	25
Fan motor	Input(hi/lo)	W	142/135
	Capacitor	μF	2
	Speed(hi/lo)	r/min	1350/950
Water pipeline	Water inlet pipe		3/4"(DN20)
	Water outlet pipe		3/4"(DN20)
	Limber pipe		3/4"(DN20)
	Condensation pipe		1/2"(DN15)
Unit dimension(W*H*D)		mm	φ570*1723	φ650*1696	φ650*1896
Packing dimension(W*H*D)		mm	650*1897*670	730*1870*750	730*2070*750
Net weight		Kg	70	80	90
Max.operation weight (full loaded)		Kg	370	380	390
Refrigerant type			R410A
Electric Heater		KW	2.0/3.0
Noise level		dB(A)	≤50
Remarks
[1]Measurement conditions:Instant heating: Ambient temperature 20℃/15℃(DB/WB), heating the water from 15℃ to 55℃.　 [2] Does not include auxiliary electric heating power and current.

Split air source solar heat pump-12-23KW-product-149

Two Water Tanks Built Inside. Seperate Water Cycle For Air Conditioning and Domestic Water.

4 Times Energy Saving as Normal Gas or Petrol Heater.

1/4 OF Normal Bill Help You to Win the Whole Unit Free In One Year.

Main Characters:

1. Can be connected with solar water heater system.
2. Fault self diagnosis and warning function.
3. From the functions, we have desigend the unit specially according to the requierment of the European countries for the propose of environment protection. Also some sepcial functions to be applicable with the requirements for the healthy caring. For example, our unit has the sterilization function. That is the water in the tank for the shower, will be heated to a very high temperature for some hours every period to kill viruse.

4. From the design, our have two seperate parts: indoor unit and outdoor unit. Only the indoor unit has the water recirculation. The outdoor unit has no water recirculation. It avoids the most dangerous problem of water freezing. We also have some special treatment and protection for the super cold weather up to -20 centigrade. With smart design, even when power off, it still can keep no freeze for several hours. Our super model heating capacity and COP are also much improved than normal model.

5. Our system has two water tanks built inside. One for domestic hot water, second for air conditioners heating and cooling. It contain 3 circuits built inside. One is for refrigerant, the other two are for water.
The following Hydraulic components are built inside to simplify installation work.
(1.Domestic Hot Water pump
(2.Expansion vessels.
(3.Filling system.
(4.Water tanks.
(5.Purging system.
(6.Safety valves.
(7.Water filter.
(8.Manometers.
The above parts are all installed and preset in the factory. It can save 80% installation time and can save several thousand EURO labour cost.

6. Our parts are always choosend with the top brand in the world
The compressor: Daikin brand Scroll type
Check valves: Danfoss brand from Danmark and Castel brand italy.
Heat expansion valve: Emerson brand
Water pump: Germany Wilo brand

 

 

Two Water Tanks Built inside, No Need additional Accumulation Tank, Flexible Installation It is no need to install a accumulation water tank between indoor and outdoor unit. This will save much trouble and space.The installation is flexible with mutiple diversity of indoor units.

heat pump actual installation shown project.

Technical Data				3AQUA-12	3AQUA-15	3AQUA-20	3AQUA-23
Heating	Floor Heating	Capacity	kW	11.20	15.00	19.50	23.20
		Power input	kW	2.45	3.30	4.15	5.00
		COP		4.57	4.55	4.70	4.64
	Fan Coils Heating	Capacity	kW	10.50	14.20	18.2	22.00
		Power input	kW	2.85	3.90	4.95	5.90
		COP		3.68	3.64	3.68	3.73
Cooling		Capacity	kW	12.50	16.50	20.10	24.00
		Power input	kW	3.40	4.70	5.20	7.10
		EER		3.68	3.51	3.87	3.38
DHW		Capacity	kW	10.70	14.50	17.80	22.50
		Power input	kW	2.90	3.95	5.10	6.05
		COP		3.69	3.67	3.49	3.72
Power Supply			V/Ph/Hz	220V/1/50HZ	220V/1/50HZ	380V/1/50HZ	380V/1/50HZ
DHW Tank Volume			L	90
A/C Tank Volume			L	50
Dimensions (HeightxWidthxDepth)		Indoor Unit	mm	1360x590x590
		Outdoor Unit	mm	860x870x325	960x970x345	1260*970*345	1460x970x345
Weight		Indoor Unit	Kg	129	129	132.00	133
		Outdoor Unit	Kg	71	98	120.00	130
Refrigerant Type				R410a
Noise Level		Indoor Unit	dB(A)	28
		Outdoor Unit	dB(A)	47	48	43	50

Heat-Recovery-Heat-Pump-for-Heat-Cool-Hot-Water-product-178

 

Thanks to our Epoch-Making new technolgy, our new heat recovery heat pump efficency (COP) is up to 7.0 when central cooling + hot water; COP is up to 5.0 when central heating+hot water.

It means 1KW electricity input  equal 7KW output.

 

Palm Central Heating+Central Cooling+Domestic hot water with heat recovery Heat Pump available for 7KW,10KW,14KW,17KW,20KW,25KW,30KW,40KW,50KW,60KW

Product Function:

Central Heating, central cooling and domestic hot water function in one solution.

Provide free hot water when cooling 

4. Environment friendly: R410a refrigerant, no pollution, no waste discharge;

5. Economic: The running cost of palm heat pump can be 85% less than that of a traditional gas boiler heating system;

6.Advanced timer setting function for heat pump :
Single day timer and Weekly timer are both available.Can be different setting for every day of the whole week.

Heat recovery heat pump technical data:

Model	AH-7R-410	AH-9R-410	AH-15R-410	AH-17R-410	AH-20R	25K	30K	40K	50K	60K
Cooling Capcity(KW)	7.8	9.5	14.5	17.5	21	26	31	40	51	60
Heating Capcity(KW)	7	9	14	17	20	25	30	40	50	60
Input power(KW)	2	2.3	4.3	4.8	5.2	6.5	7.9	10.5	13.2	15.8
Cooling+DHW COP	7
Power Supply	220V/50HZ			380V/50
Max Output water temp	60ºC
Mini water flow(L/H)(DHW)	1200	1800	2400	3000	3500	4300	5200	6800	8600	10000
Mini water flow(L/H)(Heating and cooling)	1200	1800	2400	3000	3500	4300	5200	6800	8600	10000
Water connection joint(mm)	DN25				DN32			DN50
Packing size(mm)	415*980*985	465*1085*1085	530*1180*1170	530*1180*1430	530*1180*1630			1070*1680*1990
Unit size(mm)	325*860*870	345*960*970	462*1090*1016	462*1090*1271	462*1090*1473			970*1580*1890
Protection class	IPx4
Anti Shock class	Class 1
Refrigerant	R410a
Regulation component	Emersion Expansion valve
Compressor type	Rotary		Scroll					Scroll(Dual compressor)
DHW heat exchanger	Copper pipe+ aluminum fins	Copper pipe+ aluminum fins						Copper pipe+ aluminum fins
Heating Cooling heat exchanger	Plate heat exchanger	Plate heat exchanger						Plate heat exchanger or pipe shell heat exchanger

 

Reliable Quality for saving maintenance cost:
  Our parts are always choosend with the top brand in the world
Heat exchanger: SU316 stainless plate heat exchanger.
The compressor: Daikin, Hitachi,Toshiba,Sanyo brand
Heat expansion valve: Emerson brand
Optional water pump: Wilo brand from Germany
Four way valve: Saginomiya brand of Japan
The above parts enable our heat pump to be trouble free products.

Warranty

We provide 1% free spareparts and 1 year warranty for factory fault since shipment arrival.
We will send the spare parts by courrier method after confirm it is due to factory fault.
We don't cover the cost for failure from shipment, wrong installation and incorrect usage. Of course we can provide parts by customer's cost after warranty period.

Customer Service

We can provide free heat pump installation consultation.
We can help to purchase other parts related to heat pumps or recommand reliable suppliers directly.

Shipping

For heat pump samples delivery, after packing with export class thick 5 layers paper box, we will pack heat pumps with poly wood case to avoid any damage as shown attached.

There are two ways to delivery the samples.
For sea freight, we will keep the refrigerant inside of the heat pump.
For air freight cargo, due to the air line regulation, we need to drain out the refrigerant. So you need to charge the refrigerant if you find the heat pump cannot start.
For all products above 50kg, we will fix it on a good structured wood or polywood pallet as shown below.
 

For Container delivery, we use only export thick 5 layer paper box. After carefully loading, we will take pictures before close the container door to assure everything is ok.

If by sea, normally we export at EXW, FOB or CFR terms, we only delivery goods to the destination sea port. The customers need to cover cost for their import duty and cost. Of course the customers can use our forwarder agent to help you to clear the customs.
We can provide all necessary document such as Form A, certificate of origin, Bill of lading, Invoice and packing list.

Normally it will take about 30 days by sea and one week by air.

Air to water heat pump 3.5KW 4KW 6kw to 68KW-product-157

Air to Water Heat Pumps Specification
Models (1)		AH-35H/N1	COP	AH-35H/N1a	COP	AH(P)-55H/N1	COP	AH(P)-80H/N1	COP	AH-110H/SN1	COP
Heating capacity(2) /Power input (KW)	at A20/W35ºC (3)	4.6/1.09	4.22	4.6/1.15	4	7.04/1.68	4.19	10.62/2.43	4.37	14.41/3.38	4.26
	at A20/W50ºC (3)	4.5/1.4	3.2	4.5/1.4	3.21	6.8/2.15	3.16	10.25/3.12	3.29	14.0/4.29	3.26
	at A15/W50ºC (3)	4.1/1.35	3.0	4.1/1.35	3.04	6.25/2.07	3.02	9.34/3.0	3.11	12.76/4.13	3.09
	at A7/W35ºC (3)	3.6/0.98	3.7	3.6/0.98	3.67	5.5/1.5	3.67	8.2/2.18	3.76	11.2/3.0	3.73
	at A7/W45ºC (3)	3.58/1.15	3.1	3.58/1.15	3.11	5.47/1.76	3.11	8.15/2.56	3.18	11.14/3.52	3.16
	at A7/W50ºC (3)	3.4/1.26	2.7	3.4/1.26	2.7	5.24/1.92	2.73	7.8/2.76	2.83	10.8/3.8	2.84
	at A2/W35ºC (3)	3.2/0.95	3.4	3.2/0.95	3.37	4.89/1.45	3.37	7.29/2.11	3.45	9.96/2.91	3.42
	at A2/W50ºC (3)	3.05/1.23	2.5	3.05/1.23	2.48	4.66/1.88	2.48	6.95/2.74	2.54	9.49/3.77	2.52
	at A0/W45ºC (3)	2.85/1.12	2.5	2.85/1.12	2.54	4.35/1.71	2.54	6.49/2.49	2.61	8.87/3.43	2.59
	at A-7/W45ºC (3)	2.2/1.1	2.0	2.2/1.1	2	3.36/1.68	2	5.01/2.45	2.04	6.84/3.37	2.03
	at A-7/W50ºC (3)	2.15/1.18	1.8	2.15/1.18	1.82	3.28/1.81	1.81	4.9/2.62	1.87	6.69/3.61	1.85
colling capacity/Power input(KW)	at A35/W7ºC (3)	3.3/1.15	2.9	3.3/1.15	2.9	5.1/1.76	2.9	7.6/2.56	2.97	10.5/3.52	2.98
Max.power input (KW)		1.8		1.8		2.6		3.8		5.5
Max.currentt (A)		8.2		8.2		12.5		17.4		9
Electric supply		230V-50Hz								400V-3N-50Hz
Max.water temperature (ºC)		60
Running temperature range (ºC)		-15~43
Refrigerant circuit	Refrigerant	R407C
	compressor(s)	Rotary		Rotary		Rotary		Rotary		Scroll
	Heat exchange	High efficiency fin-tube heat exchanger
	Fan motor (W)	35		80		80		150		250
	Air flow (m3/h)	2000		3000		3000		4500		6500
Water circuit	Heat exchanger	Stainless steel plate heat exchanger
	In/Out pipe	DN20(3/4'')		DN20(3/4'')		DN20(3/4'')		DN25(1'')		DN25(1'')
	Water flow (m3/h)	>=0.6		>=0.6		>=0.8		>=1.2		>=1.6
	permitted pressure	=<0.8MPa
Unit dimensions WxHxD (mm)		772x540x254		850x605x290		850x605x290		850x850x310		970x960x360
Pacage dimensions WxHxD (mm)		790x650x360		1010x695x430		1010x695x430		1010x875x430		1100x1100x440
Net weight (Kg)		45		52		65		81		110
Gross weight (Kg)		47		57		68		86		118
Noise level (dB(A))		51		51		52		54		56
Electric heater(optional) (4) (KW)

Air to Water Heat Pumps Specification
Models (1)		AH(P)-160H/SN1	COP	AH(P)-220H/SN1	COP	AH(DP)-280H/SN1	COP	AH(DP)-560H/SN1	COP	AH(DP)-680H/SN1
Heating capacity(2) /Power input (KW)	at A20/W35ºC (3)	21.51/5.12	4.2	28.7/6.9	4.16	36.5/9.1	4.01	71.68/17.72	4.05	86.95/21.99
	at A20/W50ºC (3)	20.8/6.5	3.2	28.0/8.58	3.26	35.4/11.15	3.19	70/21.66	3.24	85/26.88
	at A15/W50ºC (3)	18.79/6.34	2.96	25.6/8.25	3.1	32.2/10.7	3.01	63.78/20.87	3.07	77.44/25.9
	at A7/W35ºC (3)	16.5/4.6	3.59	22.4/6.0	3.73	28.3/7.8	3.63	56/15.15	3.71	68/18.8
	at A7/W45ºC (3)	16.41/5.4	3.04	22.28/7.04	3.16	28.14/9.15	3.08	55.69/17.78	3.15	67.62/22.06
	at A7/W50ºC (3)	15.7/5.9	2.66	21.3/7.7	2.77	27.2/10	2.72	52.89/19.48	2.73	64.22/24.17
	at A2/W35ºC (3)	14.67/4.46	3.29	19.91/5.82	3.42	25.16/7.56	3.33	49.78/14.69	3.41	60.44/18.22
	at A2/W50ºC (3)	13.98/5.77	2.42	18.98/7.53	2.52	23.98/9.79	2.45	47.44/19.01	2.5	57.61/23.6
	at A0/W45ºC (3)	13.06/5.26	2.48	17.73/6.86	2.58	22.4/8.91	2.51	44.33/17.31	2.56	53.83/21.49
	at A-7/W45ºC (3)	10.08/5.16	1.95	13.69/6.73	2.03	17.29/8.76	1.97	34.22/17.01	2.01	41.56/21.10
	at A-7/W50ºC (3)	9.85/5.54	1.78	13.38/7.22	1.85	16.9/9.39	1.8	33.44/18.24	1.84	40.61/22.64
colling capacity/Power input(KW)	at A35/W7ºC (3)	15/5.4	2.78	20/7.04	2.84	26.3/9.15	2.87	52.5/17.1878	3.07	66/22.06
Max.power input (KW)		8		10.4		13.5		26.3		32.7
Max.currentt (A)		13		17		22		42.8		53.1
Electric supply		400V-3N-50Hz
Max.water temperature (ºC)		60
Running temperature range (ºC)		-15~43
Refrigerant circuit	Refrigerant	R407C
	compressor(s)	Scroll		Scroll		2xScroll		4xScroll		4xScroll
	Heat exchange	High efficiency fin-tube heat exchanger
	Fan motor (W)	150x2		250x2		700		700x2		850x2
	Air flow (m3/h)	9000		12000		14500		28000		32000
Water circuit	Heat exchanger	Stainless steel plate heat exchanger				Double pipe heat exchangr
	In/Out pipe	DN32(1-1/4")		DN32(1-1/4")		DN40(1-1/2")		DN50(2")		DN50(2")
	Water flow (m3/h)	>=2.2		>=3.0		>=3.5		>=7.0		>=9.0
	permitted pressure	=<0.8MPa
Unit dimensions WxHxD (mm)		970x1258x380		970x1500x360		1265x1760x1020		1950x1930x1100
Pacage dimensions WxHxD (mm)		1070x1410x450		1100x1640x440		1415x1890x1200		2200x2200x1350
Net weight (Kg)		140		180		300		560		620
Gross weight (Kg)		150		195		325		600		660
Noise level (dB(A))		56		57		59		61		62
Electric heater(optional) (4) (KW)						9		20		5

Note:
(1) The circulation pump and the auxiliary electric heater is optional.D:with inside auxiliary electric heater; P:with inside circulation.
(2)The data of stable running condition(when defrosting,the average heating capacity reduces about 10% compare to corresponding data)
(3)Surrounding air temperature/outlet water temperature
(4)The electric heater must be equipped outside for the models fom AH-35H/N1 to AH(P)-220H/SN1.AHP-280 and AHP-350 electric heater can be installed inside of the unit.

Product Description

Our heat pump is a new generation heat pump prduct developed with the most advanced heating technologies. The heat pump utilizeds the energy from surrounding air and converts it to the hot water for house air conditioning heating cooling and domestic hot water supply. The whole range of this heat pump is strictly tested with our European partners to make sure the best quality for European market. Especially for super low temperature area. The working abient is -15 degree to 45 degree and keep supply of warm water from 35 degree to 60 degree.

We select the best well known components for our heat pump such as Copeland compressor, Siemens, Danfoss, Wilo. It provide the most reliability to our customers.
Striking characters distinguish from other products

1.High efficiency and energy saving

2.Environmental friendly refrigerant

3.Keep working in super low temperature

4.Using step fan motor to make the accurate control

5.Water flow protection, pressure prtection, temp protection keep the the system safety.
Other characters

1.Stainless steel plate heat exchanger with maximum pressure 40 bar

2.100% stainless water circuit to keep water clean

3.Microprocessor control and error alarm and display

4.Electric protection class IPX4

5.Compact design for good looking, easy installation and maintenance